Of tropical wood

44.09 Wood (including strips and friezes for parquet flooring, not assembled) continuously sha ed (tongued, grooved, rebated, chamfered, v-jointed, beaded, moulded, rounded or t e like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed. Y, 4409.10 4409.21 4409.29 - Coniferous - - Of bamboo - - Other This heading covers timber, particular1 in the form of boards, planks, etc., which, after sawing or squaring, has been continuously s aped along an of its edges, ends or faces either to facilitate subsequent assembly or to obtain the moul ings or beadings described in Item (4) below, whether or not planed, sanded or end-jointed, e.g. finger-jointed (see the General Explanatory Note to this Chapter Continuously shaped wood covers both products with a uniform cross-section throughout tke length or width and products having a repetitive design in relief. K ‘l Tongued and rooved wood consists of boards of which one ed e or end is ooved and the other flanged tongued), the t o w of one board fitting into tfe groove o another when assembled side y side. F= % Rebated boards are those in which one or more edges or ends have been cut to form a step. Chamfered boards are those of which one or more comers have been removed at an angle to the face and the edge or end. Other common forms of timber covered by the heading include : (1) Boards with rounded edges or ends. (2) V-jointed wood (i.e., wood tongued and grooved with chamfered edges or ends), including centre-V-jointed wood (i.e., wth a V-shaped channel in the centre of the board and also usually tongued and grooved and sometimes chamfered at the edges or ends). ooved with a simple bead between the edge or end wood (i.e., wood tongued and grooved with a (4) Moulded wood also known as mouldings or beadings i.e., strips of wood sha ed to vmous contours obtained mechanically or by hand), suc as are used for the manu acture b. P of picture frames, decoration of walls, furniture, doors and other carpentry or joinery. (5) Rounded woods such as drawn woods, which are very thin rods, enerally of round section, of a kind used in the manufacture of certain types of mat& splints, pegs for footwear, certain es of wooden sun-blinds (pinoleum bltnds), toothptcks, cheese-making screens, etc. Dowe ling in the length, being round wooden rods or oles of a uniform cross-section, generally ranging in diameter from 2 mm to 75 mm an in length from 45 cm to 250 cm, of a kind used, e.g., for joining parts of wooden furniture, is also classified in this heading. $ The heading also covers strips and friezes for flooring consisting of narrow pieces of boards, provided they have been continuously shaped, e.g., tongued and grooved. If they have not been worked beyond planing, sanding or end-jotnting, e.g. finger-jointing, they fall in heading 44.07. Strips of plywood or veneered wood for parquet flooring are also excluded (heading 44.12). The heading also excludes : (a) Planed or other worked boards presented in sets as box boards (heading 44.15). (b) Wood which has been mortised or tenoned, dovetailed or similarly worked at the ends and wood assembled into panels being builders' carpentry or 'ornery (e.g., assembled flooring anels, including parquet flooring panels, made up fiom wooden locks, stnps, friezes, etc., whe er or not on a support of one or more layers of wood) (heading 44.18). L & (c) Panels consisting of laths of roughly sawn wood, assembled with glue in order to facilitate transport ox later working (heading 44.21). (d) Moulded wood built up by su erimposing a moulding on another piece of moulded or unmoulded wood (heading 44.18 or 4431f than painting, staining or varnishing (e.g., veneered, polished, bronzed, or aced with metal Ieaf) (generally heading 44.21). (e) Wood which has been surface worked beyond laning or sanding, other F ( f ) Wooden strips of a kind clearly identifiable for incorporation in an article of furniture, such as notched strips for cupboard and bookcase shelves, etc. (heading 94.03).