WCO Explanatory Notes reproduced for reference. © World Customs Organization. Verify against official WCO publication.
72.12 - Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated (+). 7212.10 - Plated or coated with tin 7212.20 - Electrolyticallyplated or coated with zinc 7212.30 - Otherwise plated or coated with zinc 7212.40 - Painted, varnished or coated with plastics 7212.50 - Otherwise plated or coated 7212.60 - Clad This heading covers the same kind of products as described in heading 72.10 but, to fall in this heading, they must be of a width of less than 600 mm. This heading does not cover insulated electric strip (heading 85.44). Subheading Explanatory Notes. See the Explanatory Note to the subheadings of heading 72.10 in respect of products subjected to more than one type of coabng, plating or cladd~ng. Subheadings 7212.20 and 7212.30 See the Explanatory Note to subheadings 7210.30,7210.41 and 72 10.49.
1.- In this Chapter and, in the case of Notes (d), (e) and (f) throughout the Nomenclature, the following expressions have the meanings hereby assigned to them : (a) Pig iron Iron-carbon alloys not usefully malleable, containing more than 2 % by weight of carbon and which may contain by weight one or more other elements within the following limits : - not more than 10 % of chromium - not more than 6 % of manganese - not more than 3 % of phosphorus - not more than 8 % of silicon - a total of not more than 10 % of other elements. (b) Spiegeleisen Iron-carbon alloys containing by weight more than 6 % but not more than 30 % of manganese and otherwise conforming to the specification at (a) above. (c) Ferro-alloys Alloys in pigs, blocks, lumps or similar primary forms, in forms obtained by continuous casting and also in granular or powder forms, whether or not agglomerated, commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in ferrous metallurgy and generally not usefully malleable, containing by weight 4 % or more of the element iron and one or more of the following : - more than 10 % of chromium - more than 30 % of manganese - more than 3 % of phosphorus - more than 8 % of silicon - a total of more than 10 % of other elements, excluding carbon, subject to a maximum content of 10 % in the case of copper.